AixLib/ThermalZones/HighOrder/House/OFD_MiddleInnerLoadWall/BuildingEnvelope/UpperFloorBuildingEnvelope.mo
1: Name 'Medium' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Medium. Affected line: replaceable package Medium = AixLib.Media.Air constrainedby Modelica.Media.Interfaces.PartialMedium "Medium in the component" annotation (choices( choice(redeclare package MediumR = AixLib.Media.Air "Moist air"), choice(redeclare package MediumR = AixLib.Media.Air (extraPropertiesNames={"CO2"}, C_nominal = {6.12E-4}) "Moist air with tracer gas (404 ppm CO2)")));

2: Documentation too short, Name 'room_width_short' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: room_width_short. Affected line: parameter Modelica.Units.SI.Length room_width_short=2.28 "w2 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

3: Documentation too short, Name 'room_height_long' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: room_height_long. Affected line: parameter Modelica.Units.SI.Height room_height_long=2.60 "h1 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

4: Documentation too short, Name 'room_height_short' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: room_height_short. Affected line: parameter Modelica.Units.SI.Height room_height_short=1 "h2 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

5: Documentation too short, Name 'roof_width' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: roof_width. Affected line: parameter Modelica.Units.SI.Length roof_width=2.21 "wRO" annotation (Dialog(group="Dimensions", descriptionLabel=true));

6: Documentation too short, Name 'length5' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: length5. Affected line: parameter Modelica.Units.SI.Length length5=3.3 "l5 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

7: Documentation too short, Name 'length6' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: length6. Affected line: parameter Modelica.Units.SI.Length length6=2.44 "l6 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

8: Documentation too short, Name 'length7' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: length7. Affected line: parameter Modelica.Units.SI.Length length7=1.33 "l7 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

9: Documentation too short, Name 'length8' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: length8. Affected line: parameter Modelica.Units.SI.Length length8=3.3 "l8 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

10: Name 'thickness_IWsimple' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: thickness_, Wsimple. Affected line: parameter Modelica.Units.SI.Length thickness_IWsimple=0.145 "thickness IWsimple " annotation (Dialog(group="Dimensions", descriptionLabel=true));

11: Name 'windowarea_63' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_63. Affected line: parameter Modelica.Units.SI.Area windowarea_63=1.73 " Area Window63 " annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

12: Name 'windowarea_72' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_7. Affected line: parameter Modelica.Units.SI.Area windowarea_72=1.73 " Area Window72" annotation (Dialog( group="Windows and Doors", descriptionLabel=true, joinNext=true));

13: Name 'windowarea_73' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_73. Affected line: parameter Modelica.Units.SI.Area windowarea_73=1.73 " Area Window73 " annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

14: Name 'windowarea_92' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_9. Affected line: parameter Modelica.Units.SI.Area windowarea_92=1.73 " Area Window51" annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

15: Name 'windowarea_102' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_10. Affected line: parameter Modelica.Units.SI.Area windowarea_102=1.73 " Area Window102" annotation (Dialog( group="Windows and Doors", descriptionLabel=true, joinNext=true));

16: Name 'windowarea_103' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_103. Affected line: parameter Modelica.Units.SI.Area windowarea_103=1.73 " Area Window103 " annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

17: Name 'Tset_Bedroom' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, Bedroom. Affected line: parameter Modelica.Units.SI.Temperature Tset_Bedroom=295.15 "Tset_bedroom" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, joinNext=true, enable=withDynamicVentilation));

18: Name 'Tset_Children1' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, Children. Affected line: parameter Modelica.Units.SI.Temperature Tset_Children1=295.15 "Tset_children1" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=withDynamicVentilation));

19: Name 'Tset_Corridor' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, Corridor. Affected line: parameter Modelica.Units.SI.Temperature Tset_Corridor=291.15 "Tset_corridor" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=withDynamicVentilation));

20: Name 'Tset_Bath' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, Bath. Affected line: parameter Modelica.Units.SI.Temperature Tset_Bath=297.15 "Tset_Bath" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, joinNext=true, enable=withDynamicVentilation));

21: Name 'Tset_Children2' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, Children. Affected line: parameter Modelica.Units.SI.Temperature Tset_Children2=295.15 "Tset_children2" annotation (Dialog( group="Dynamic ventilation", descriptionLabel=true, enable=withDynamicVentilation));

22: Name 'UValOutDoors' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Doors. Affected line: parameter Modelica.Units.SI.CoefficientOfHeatTransfer UValOutDoors "U-value (thermal transmittance) of doors in outer walls" annotation (Dialog(tab="Outer walls", group="Doors"));

23: Name 'epsOutDoors' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Doors. Affected line: parameter Modelica.Units.SI.Emissivity epsOutDoors( min=0, max=1) = 0.95 "Emissivity of inside surface of outer doors" annotation (Dialog(tab="Outer walls", group="Doors"));

24: Missing documentation, Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Utilities.Interfaces.SolarRad_in RoofS annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,64})));Utilities.Interfaces.SolarRad_in RoofN annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,88})));

25: Missing documentation, Name 'thermFloor_Bedroom' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Floor_, Bedroom. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermFloor_Bedroom annotation (Placement(transformation(extent={{-66,-120},{-46,-100}})));

26: Missing documentation, Name 'thermFloor_Children1' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Floor_, Children. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermFloor_Children1 annotation (Placement(transformation(extent={{-42,-120},{-22,-100}})));

27: Missing documentation, Name 'thermFloor_Corridor' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Floor_, Corridor. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermFloor_Corridor annotation (Placement(transformation(extent={{-10,-120},{10,-100}})));

28: Missing documentation, Name 'thermFloor_Bath' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Floor_, Bath. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermFloor_Bath annotation (Placement(transformation(extent={{20,-120},{40,-100}})));

29: Missing documentation, Name 'thermFloor_Children2' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Floor_, Children. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermFloor_Children2 annotation (Placement(transformation(extent={{60,-120},{80,-100}})));

30: Missing documentation, Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Rooms.OFD.Ow2IwL2IwS1Lf1At1Ro1 Bedroom( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final solar_absorptance_OW=solar_absorptance_OW, withWindow2=true, room_length=length5 + length6 + thickness_IWsimple, final eps_door_OD2=epsOutDoors, final U_door_OD2=UValOutDoors, room_lengthb=length6, room_width_long=room_width_long, room_width_short=room_width_short, room_height_long=room_height_long, room_height_short=room_height_short, roof_width=roof_width, final solar_absorptance_RO=solar_absorptance_RO, windowarea_OW2=windowarea_62, withWindow3=true, windowarea_RO=windowarea_63, withDoor2=false, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Bedroom, T0_air=T0_air, nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{-82,14},{-42,78}})));Rooms.OFD.Ow2IwL1IwS1Lf1At1Ro1 Children1( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final solar_absorptance_OW=solar_absorptance_OW, withWindow2=true, room_length=length5, room_width_long=room_width_long, room_width_short=room_width_short, room_height_long=room_height_long, room_height_short=room_height_short, roof_width=roof_width, final solar_absorptance_RO=solar_absorptance_RO, windowarea_OW2=windowarea_72, withWindow3=true, windowarea_RO=windowarea_73, withDoor2=false, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Children1, T0_air=T0_air, final eps_door_OD2=epsOutDoors, final U_door_OD2=UValOutDoors, nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{78,28}, {40,76}})));Rooms.OFD.Ow2IwL1IwS1Lf1At1Ro1 Bath( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final solar_absorptance_OW=solar_absorptance_OW, room_length=length8, room_width_long=room_width_long, room_width_short=room_width_short, room_height_long=room_height_long, room_height_short=room_height_short, roof_width=roof_width, final solar_absorptance_RO=solar_absorptance_RO, windowarea_OW2=windowarea_92, withDoor2=false, door_width_OD2=0, door_height_OD2=0, withWindow2=true, withWindow3=false, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Bath, T0_air=T0_air, final eps_door_OD2=epsOutDoors, final U_door_OD2=UValOutDoors, nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{80,-36}, {42,-84}})));Rooms.OFD.Ow2IwL2IwS1Lf1At1Ro1 Children2( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final solar_absorptance_OW=solar_absorptance_OW, withWindow2=true, room_length=length7 + length8 + thickness_IWsimple, room_width_long=room_width_long, room_width_short=room_width_short, room_height_long=room_height_long, room_height_short=room_height_short, roof_width=roof_width, final solar_absorptance_RO=solar_absorptance_RO, windowarea_OW2=windowarea_102, withWindow3=true, windowarea_RO=windowarea_103, final eps_door_OD2=epsOutDoors, final U_door_OD2=UValOutDoors, room_lengthb=length7, withDoor2=false, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Children2, T0_air=T0_air, nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{-84,-20},{-44,-84}})));Rooms.OFD.Ow1IwL2IwS1Lf1At1Ro1 Corridor( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Corridor, final solar_absorptance_OW=solar_absorptance_OW, room_length=length6 + length7 + thickness_IWsimple, room_lengthb=length7, room_width_long=room_width_long, room_width_short=room_width_short, room_height_long=room_height_long, room_height_short=room_height_short, roof_width=roof_width, final solar_absorptance_RO=solar_absorptance_RO, withWindow3=false, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, T0_air=T0_air, nPorts=2, redeclare final package Medium = Medium) annotation (Placement(transformation(extent={{78,-28},{ 38,10}})));Utilities.Interfaces.SolarRad_in North annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,40})));Utilities.Interfaces.SolarRad_in East annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,16})));Utilities.Interfaces.SolarRad_in South annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,-10})));Utilities.Interfaces.SolarRad_in West annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,-36})));

31: Missing documentation, Name 'WindSpeedPort' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Wind, Speed, Port. Affected line: Modelica.Blocks.Interfaces.RealInput WindSpeedPort if (calcMethodOut == AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodConvectiveHeatTransfer.DIN_6946 or calcMethodOut == AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodConvectiveHeatTransfer.ASHRAE_Fundamentals) annotation (Placement(transformation(extent={{-130,10},{-100,40}})));

32: Name 'AirExchangePort' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Exchange, Port. Affected line: Modelica.Blocks.Interfaces.RealInput AirExchangePort[5] "1(6): Bedroom_UF, 2(7): Child1_UF, 3(8): Corridor_UF, 4(9): Bath_UF, 5(10): Child2_UF" annotation (Placement(transformation(extent={{-130,-26},{-100,4}}), iconTransformation(extent={{-130,-26},{-100,4}})));

33: Missing documentation, Name 'thermCeiling_Bedroom' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Bedroom. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Bedroom annotation (Placement(transformation(extent={{-98,100},{-82,118}})));

34: Missing documentation, Name 'thermCeiling_Children1' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Children. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Children1 annotation (Placement(transformation(extent={{-58,100},{-40,118}})));

35: Missing documentation, Name 'thermCeiling_Corridor' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Corridor. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Corridor annotation (Placement(transformation(extent={{-20,100},{-2,118}})));

36: Missing documentation, Name 'thermCeiling_Bath' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Bath. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Bath annotation (Placement(transformation(extent={{20,100},{38,118}})));

37: Missing documentation, Name 'thermCeiling_Children2' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Children. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Children2 annotation (Placement(transformation(extent={{60,100},{78,118}})));

38: Missing documentation, Name 'thermCorridor' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Corridor. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCorridor annotation (Placement(transformation(extent={{100,-120},{120,-100}})));

39: Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Utilities.Interfaces.Adaptors.ConvRadToCombPort heatStarToCombHeaters[5] annotation (Placement(transformation( extent={{10,-8},{-10,8}}, rotation=90, origin={0,-28})));Utilities.Interfaces.ConvRadComb portConvRadRooms[5] "1(6): Bedroom_UF, 2(7): Child1_UF, 3(8): Corridor_UF, 4(9): Bath_UF, 5(10): Child2_UF" annotation (Placement(transformation(extent={{-10,-10},{10,10}})));

40: Name 'portVent_in' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent. Affected line: Modelica.Fluid.Interfaces.FluidPort_a portVent_in[5](redeclare final package Medium = Medium) "Inlet for ventilation" annotation (Placement( transformation(extent={{94,-78},{114,-58}}), iconTransformation(extent={ {94,-70},{108,-56}})));

41: Name 'portVent_out' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent. Affected line: Modelica.Fluid.Interfaces.FluidPort_b portVent_out[5](redeclare final package Medium = Medium) "Outlet of Ventilation" annotation (Placement( transformation(extent={{94,-94},{114,-74}}), iconTransformation(extent={ {94,-94},{108,-80}})));

42: Missing documentation, Name 'thermOutside' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Outside. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermOutside annotation (Placement(transformation(extent={{-114,90},{-94,110}})));


AixLib/ThermalZones/HighOrder/Rooms/BaseClasses/PartialRoomParams.mo
1: Name 'wallTypes' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: wall, Types. Affected line: replaceable parameter AixLib.DataBase.Walls.Collections.BaseDataMultiWalls wallTypes constrainedby AixLib.DataBase.Walls.Collections.BaseDataMultiWalls "Types of walls (contains multiple records)" annotation(Dialog(group = "Structure of wall layers"), choicesAllMatching = true, Placement(transformation(extent={{-8,82},{8,98}})));

2: Name 'energyDynamicsWalls' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: energy, Dynamics, Walls. Affected line: parameter Modelica.Fluid.Types.Dynamics energyDynamicsWalls=Modelica.Fluid.Types.Dynamics.DynamicFreeInitial "Type of energy balance for wall capacities: dynamic (3 initialization options) or steady state" annotation(Evaluate=true, Dialog(tab="Dynamics"));

3: Documentation too short, Name 'T0_air' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: T0_air. Affected line: parameter Modelica.Units.SI.Temperature T0_air=295.11 "Air" annotation (Dialog(tab="Initialization", group="Air volume of room"));

4: Name 'TWalls_start' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Walls. Affected line: parameter Modelica.Units.SI.Temperature TWalls_start= Modelica.Units.Conversions.from_degC(16) "Initial temperature of all walls" annotation (Dialog(tab="Initialization", group="Walls"));

5: Name 'radLongCalcMethod' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Long, Calc, Method. Affected line: parameter AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodRadiativeHeatTransfer radLongCalcMethod=AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodRadiativeHeatTransfer.No_approx "Calculation method for longwave radiation heat transfer" annotation ( Evaluate=true, Dialog(tab="Inner walls", group="Longwave radiation", compact=true));

6: Name 'T_ref' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: T_ref. Affected line: parameter Modelica.Units.SI.Temperature T_ref= Modelica.Units.Conversions.from_degC(16) "Reference temperature for optional linearization of longwave radiation" annotation (Dialog( tab="Inner walls", group="Longwave radiation", enable=radLongCalcMethod == AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodRadiativeHeatTransfer.Linear_constant_T_ref));

7: Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: replaceable parameter DataBase.WindowsDoors.Simple.OWBaseDataDefinition_Simple Type_Win "Window parametrization" annotation (Dialog(tab="Outer walls", group="Windows"), choicesAllMatching = true);

8: Name 'CorrSolarGainWin' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Corr, Solar. Affected line: replaceable model CorrSolarGainWin = AixLib.ThermalZones.HighOrder.Components.WindowsDoors.BaseClasses.CorrectionSolarGain.PartialCorG constrainedby AixLib.ThermalZones.HighOrder.Components.WindowsDoors.BaseClasses.CorrectionSolarGain.PartialCorG "Correction model for solar irradiance as transmitted radiation" annotation (choicesAllMatching=true, Dialog(tab="Outer walls", group="Windows", enable = withWindow and outside));

9: Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: replaceable parameter DataBase.Surfaces.RoughnessForHT.PolynomialCoefficients_ASHRAEHandbook surfaceType=DataBase.Surfaces.RoughnessForHT.Brick_RoughPlaster() "Surface type of outside wall" annotation (Dialog(tab="Outer walls", group="Heat convection", enable=(calcMethodOut == AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodConvectiveHeatTransfer.ASHRAE_Fundamentals)));

10: Name 'ratioSunblind' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: ratio, Sunblind. Affected line: parameter Real ratioSunblind(min=0.0, max=1.0) = 0.8 "Sunblind factor. 1 means total blocking of irradiation, 0 no sunblind" annotation(Dialog(tab="Outer walls", group = "Sunblind", enable=use_sunblind));

11: Name 'solIrrThreshold' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Threshold. Affected line: parameter Modelica.Units.SI.Irradiance solIrrThreshold(min=0.0) = 350 "Threshold for global solar irradiation on this surface to enable sunblinding (see also TOutAirLimit)" annotation (Dialog( tab="Outer walls", group="Sunblind", enable=use_sunblind));

12: Name 'TOutAirLimit' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Limit. Affected line: parameter Modelica.Units.SI.Temperature TOutAirLimit=293.15 "Temperature at which sunblind closes (see also solIrrThreshold)" annotation (Dialog( tab="Outer walls", group="Sunblind", enable=use_sunblind));

13: Name 'e' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: e. Affected line: parameter Real e=0.03 "Coefficient of windshield" annotation (Dialog(tab="Infiltration acc. to EN 12831 (airtightness)", enable=use_infiltEN12831));

14: Name 'HeatingLimit' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Heating, Limit. Affected line: parameter Modelica.Units.SI.Temperature HeatingLimit=288.15 "Outside temperature at which the heating activates" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=if withDynamicVentilation then true else false));

15: Name 'Max_VR' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Max_. Affected line: parameter Real Max_VR=10 "Maximal ventilation rate" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=if withDynamicVentilation then true else false));

16: Name 'Diff_toTempset' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Diff_to, Tempset. Affected line: parameter Modelica.Units.SI.TemperatureDifference Diff_toTempset=2 "Difference to set temperature" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=if withDynamicVentilation then true else false));

17: Documentation too short, Name 'Tset' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset. Affected line: parameter Modelica.Units.SI.Temperature Tset=295.15 "Tset" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=if withDynamicVentilation then true else false));


AixLib/ThermalZones/HighOrder/Rooms/BaseClasses/PartialRoom.mo
1: Name 'nPorts' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Ports. Affected line: parameter Integer nPorts=0 "Number of fluid ports" annotation(Evaluate=true, Dialog(connectorSizing=true, tab="General",group="Ports"));

2: Name 'use_moisture_balance' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: use_moisture_balance. Affected line: parameter Boolean use_moisture_balance=false "Set to true to enable moisture gain balance in the rooms air" annotation (Dialog(group="Moist Air"));

3: Name 'use_C_flow_input' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: C_flow_input. Affected line: parameter Boolean use_C_flow_input=true "Set to true to use an input connector for the trace substances. False indicates internal calculation" annotation(Dialog(enable=use_C_flow, group="Trace Substances"));

4: Missing documentation, Name 'thermRoom' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermRoom annotation (Placement( transformation(extent={{-20,12},{0,32}}), iconTransformation(extent={{-24, -10},{-4,10}})));

5: Missing documentation, Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Utilities.Interfaces.RadPort starRoom annotation (Placement(transformation( extent={{2,12},{22,32}}), iconTransformation(extent={{6,-10},{26,10}})));Components.DryAir.InfiltrationRate_DIN12831 infiltrationRate( final room_V=room_V, final n50=n50, final e=e, final eps=eps, final c=cAir, final rho = denAir) if use_infiltEN12831 annotation (Placement(transformation(extent={{-30,-10},{-18,2}})));

6: Missing documentation, Name 'AirExchangePort' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Exchange, Port. Affected line: Modelica.Blocks.Interfaces.RealInput AirExchangePort annotation (Placement( transformation( extent={{-13,-13},{13,13}}, rotation=0, origin={-112,80}), iconTransformation( extent={{-10,-9.5},{10,9.5}}, rotation=0, origin={-110,69.5})));

7: Missing documentation, Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Utilities.Interfaces.Adaptors.ConvRadToCombPort thermStar_Demux annotation (Placement( transformation( extent={{-6,5},{6,-5}}, rotation=90, origin={-7,-2})));Components.MoistAir.VarMoistAirExchange NaturalVentilation(final V=room_V) annotation (Placement(transformation(extent={{-34,-24},{-22,-12}})));Components.DryAir.DynamicVentilation dynamicVentilation( final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset) if withDynamicVentilation annotation (Placement(transformation(extent={{-30,-38},{-18,-26}})));

8: Missing documentation, Name 'Tair' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tair. Affected line: Modelica.Thermal.HeatTransfer.Sensors.TemperatureSensor Tair annotation (Placement(transformation(extent={{24,-6},{38,8}})));

9: Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Fluid.MixingVolumes.MixingVolumeMoistAir airload( redeclare final package Medium = Medium, final p_start=p_start, final X_start=X_start, final C_start=C_start, final C_nominal=C_nominal, final mSenFac=mSenFac, final use_C_flow=use_C_flow, final nPorts=nPorts, final m_flow_nominal=room_V*6/3600*1.2, final V=room_V, final energyDynamics=energyDynamics, final massDynamics=massDynamics, final T_start=T_start) "Indoor air volume" annotation (Placement(transformation(extent={{18,-22},{-2,-2}})));

10: Name 'ports' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: ports. Affected line: Modelica.Fluid.Vessels.BaseClasses.VesselFluidPorts_b ports[nPorts]( redeclare each final package Medium = Medium) "Auxiliary fluid inlets and outlets to indoor air volume" annotation ( Placement(transformation( extent={{-45,-12},{45,12}}, origin={-3,-100}),iconTransformation( extent={{-30.5,-8},{30.5,8}}, origin={0,-101.5})));

11: Name 'ventHum' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: vent. Affected line: Modelica.Blocks.Interfaces.RealInput ventHum if use_moisture_balance "absolute humidity of ventilation air" annotation (Placement(transformation( extent={{-122,-48},{-100,-26}}), iconTransformation(extent={{-120,-46}, {-100,-26}})));

12: Missing documentation, Name 'thermOutside' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Outside. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermOutside annotation (Placement(transformation(extent={{-110,90},{-90,110}})));

13: Name 'h_fg' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: h_fg. Affected line: protected constant Modelica.Units.SI.SpecificEnergy h_fg= AixLib.Media.Air.enthalpyOfCondensingGas(273.15 + 37) "Latent heat of water vapor";


AixLib/ThermalZones/HighOrder/House/OFD_MiddleInnerLoadWall/BuildingEnvelope/GroundFloorBuildingEnvelope.mo
1: Name 'Medium' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Medium. Affected line: replaceable package Medium = AixLib.Media.Air constrainedby Modelica.Media.Interfaces.PartialMedium "Medium in the component" annotation (choices( choice(redeclare package MediumR = AixLib.Media.Air "Moist air"), choice(redeclare package MediumR = AixLib.Media.Air (extraPropertiesNames={"CO2"}, C_nominal = {6.12E-4}) "Moist air with tracer gas (404 ppm CO2)")));

2: Name 'room_height' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: room_height. Affected line: parameter Modelica.Units.SI.Height room_height=2.60 "height" annotation (Dialog(group="Dimensions", descriptionLabel=true));

3: Documentation too short, Name 'length1' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: length. Affected line: parameter Modelica.Units.SI.Length length1=3.3 "l1 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

4: Documentation too short, Name 'length2' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: length. Affected line: parameter Modelica.Units.SI.Length length2=2.44 "l2 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

5: Documentation too short, Name 'length3' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: length3. Affected line: parameter Modelica.Units.SI.Length length3=1.33 "l3 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

6: Documentation too short, Name 'length4' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: length4. Affected line: parameter Modelica.Units.SI.Length length4=3.3 "l4 " annotation (Dialog(group="Dimensions", descriptionLabel=true));

7: Name 'thickness_IWsimple' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: thickness_, Wsimple. Affected line: parameter Modelica.Units.SI.Length thickness_IWsimple=0.145 "thickness IWsimple " annotation (Dialog(group="Dimensions", descriptionLabel=true));

8: Name 'windowarea_12' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_1. Affected line: parameter Modelica.Units.SI.Area windowarea_12=1.73 " Area Window12 " annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

9: Name 'windowarea_22' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_2. Affected line: parameter Modelica.Units.SI.Area windowarea_22=1.73 " Area Window22" annotation (Dialog( group="Windows and Doors", descriptionLabel=true, joinNext=true));

10: Name 'windowarea_41' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_4. Affected line: parameter Modelica.Units.SI.Area windowarea_41=1.4 " Area Window41 " annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

11: Name 'windowarea_51' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_5. Affected line: parameter Modelica.Units.SI.Area windowarea_51=3.46 " Area Window51" annotation (Dialog( group="Windows and Doors", descriptionLabel=true, joinNext=true));

12: Name 'windowarea_52' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: windowarea_5. Affected line: parameter Modelica.Units.SI.Area windowarea_52=1.73 " Area Window52 " annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

13: Name 'door_width_31' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: door_width_3. Affected line: parameter Modelica.Units.SI.Length door_width_31=1.01 "Width Door31" annotation (Dialog( group="Windows and Doors", joinNext=true, descriptionLabel=true));

14: Name 'door_height_31' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: door_height_3. Affected line: parameter Modelica.Units.SI.Length door_height_31=2.25 "Height Door31 " annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

15: Name 'door_width_42' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: door_width_4. Affected line: parameter Modelica.Units.SI.Length door_width_42=1.25 "Width Door42" annotation (Dialog( group="Windows and Doors", joinNext=true, descriptionLabel=true));

16: Name 'door_height_42' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: door_height_4. Affected line: parameter Modelica.Units.SI.Length door_height_42=2.25 "Height Door42 " annotation (Dialog(group="Windows and Doors", descriptionLabel=true));

17: Name 'UValOutDoors' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Doors. Affected line: parameter Modelica.Units.SI.CoefficientOfHeatTransfer UValOutDoors "U-value (thermal transmittance) of doors in outer walls" annotation (Dialog(tab="Outer walls", group="Doors"));

18: Name 'epsOutDoors' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Doors. Affected line: parameter Modelica.Units.SI.Emissivity epsOutDoors( min=0, max=1) = 0.95 "Emissivity of inside surface of outer doors" annotation (Dialog(tab="Outer walls", group="Doors"));

19: Name 'Tset_Hobby' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, Hobby. Affected line: parameter Modelica.Units.SI.Temperature Tset_Hobby=295.15 "Tset_hobby" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=withDynamicVentilation));

20: Name 'Tset_Corridor' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, Corridor. Affected line: parameter Modelica.Units.SI.Temperature Tset_Corridor=291.15 "Tset_corridor" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=withDynamicVentilation));

21: Name 'Tset_WC' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, W. Affected line: parameter Modelica.Units.SI.Temperature Tset_WC=291.15 "Tset_WC" annotation ( Dialog( tab="Dynamic ventilation", descriptionLabel=true, joinNext=true, enable=withDynamicVentilation));

22: Name 'Tset_Kitchen' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Tset_, Kitchen. Affected line: parameter Modelica.Units.SI.Temperature Tset_Kitchen=295.15 "Tset_kitchen" annotation (Dialog( tab="Dynamic ventilation", descriptionLabel=true, enable=withDynamicVentilation));

23: Missing documentation, Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Rooms.OFD.Ow2IwL2IwS1Gr1Uf1 Livingroom( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final U_door_OD1=UValOutDoors, final eps_door_OD1=epsOutDoors, room_lengthb=length2, room_width=room_width, room_height=room_height, room_length=length1 + length2 + thickness_IWsimple, final solar_absorptance_OW=solar_absorptance_OW, windowarea_OW1=windowarea_11, windowarea_OW2=windowarea_12, withDoor1=false, withDoor2=false, withWindow1=true, withWindow2=true, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Livingroom, T0_air=T0_air, final U_door_OD2=UValOutDoors, final eps_door_OD2=epsOutDoors, final nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{-84,12},{-40,76}})));Rooms.OFD.Ow2IwL1IwS1Gr1Uf1 Hobby( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, room_length=length1, room_width=room_width, room_height=room_height, final solar_absorptance_OW=solar_absorptance_OW, final U_door_OD1=UValOutDoors, final eps_door_OD1=epsOutDoors, windowarea_OW2=windowarea_22, withDoor1=false, withDoor2=false, withWindow1=false, withWindow2=true, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Hobby, T0_air=T0_air, final U_door_OD2=UValOutDoors, final eps_door_OD2=epsOutDoors, final nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{84,28},{46,76}})));Rooms.OFD.Ow2IwL1IwS1Gr1Uf1 WC_Storage( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, room_length=length4, room_width=room_width, room_height=room_height, final solar_absorptance_OW=solar_absorptance_OW, withWindow1=true, windowarea_OW1=windowarea_41, final U_door_OD1=UValOutDoors, final eps_door_OD1=epsOutDoors, withDoor2=true, door_width_OD2=door_width_42, door_height_OD2=door_height_42, withWindow2=false, withDoor1=false, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_WC, T0_air=T0_air, final U_door_OD2=UValOutDoors, final eps_door_OD2=epsOutDoors, final nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{82,-36},{44,-84}})));Rooms.OFD.Ow2IwL2IwS1Gr1Uf1 Kitchen( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final Type_Win=Type_Win, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, room_length=length3 + length4 + thickness_IWsimple, room_width=room_width, room_height=room_height, final solar_absorptance_OW=solar_absorptance_OW, withWindow1=true, windowarea_OW1=windowarea_51, final U_door_OD1=UValOutDoors, final eps_door_OD1=epsOutDoors, withWindow2=true, windowarea_OW2=windowarea_52, room_lengthb=length3, withDoor1=false, withDoor2=false, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Kitchen, T0_air=T0_air, final U_door_OD2=UValOutDoors, final eps_door_OD2=epsOutDoors, final nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{-84,-20},{-44,-84}})));Rooms.OFD.Ow1IwL2IwS1Gr1Uf1 Corridor( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=Tset_Corridor, room_length=length2 + length3 + thickness_IWsimple, room_width=room_width, room_height=room_height, final solar_absorptance_OW=solar_absorptance_OW, withDoor1=true, door_width_OD1=door_width_31, door_height_OD1=door_height_31, final U_door_OD1=UValOutDoors, final eps_door_OD1=epsOutDoors, room_lengthb=length3, withWindow1=false, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, T0_air=T0_air, final nPorts=2, redeclare package Medium = Medium) annotation (Placement(transformation(extent={{82,-28},{42,10}})));Utilities.Interfaces.SolarRad_in North annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,88})));Utilities.Interfaces.SolarRad_in East annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,60})));Utilities.Interfaces.SolarRad_in South annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,26})));Utilities.Interfaces.SolarRad_in West annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={110,-4})));

24: Missing documentation, Name 'WindSpeedPort' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Wind, Speed, Port. Affected line: Modelica.Blocks.Interfaces.RealInput WindSpeedPort if (calcMethodOut == AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodConvectiveHeatTransfer.DIN_6946 or calcMethodOut == AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodConvectiveHeatTransfer.ASHRAE_Fundamentals) annotation (Placement(transformation(extent={{-130,12},{-100,42}})));

25: Name 'AirExchangePort' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Exchange, Port. Affected line: Modelica.Blocks.Interfaces.RealInput AirExchangePort[5] "1: LivingRoom_GF, 2: Hobby_GF, 3: Corridor, 4: WC_Storage_GF, 5: Kitchen_GF" annotation (Placement(transformation(extent={{-130,-18},{-100,12}})));

26: Missing documentation, Name 'thermCeiling_Livingroom' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Livingroom. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Livingroom annotation (Placement(transformation(extent={{-100,100},{-84,118}})));

27: Missing documentation, Name 'thermCeiling_Hobby' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Hobby. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Hobby annotation (Placement(transformation(extent={{-58,100},{-40,118}})));

28: Missing documentation, Name 'thermCeiling_Corridor' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Corridor. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Corridor annotation (Placement(transformation(extent={{-20,100},{-2,118}})));

29: Missing documentation, Name 'thermCeiling_WCStorage' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, W, Storage. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_WCStorage annotation (Placement(transformation(extent={{20,100},{38,118}})));

30: Missing documentation, Name 'thermCeiling_Kitchen' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Ceiling_, Kitchen. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCeiling_Kitchen annotation (Placement(transformation(extent={{62,100},{80,118}})));

31: Missing documentation, Name 'thermCorridor' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Corridor. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermCorridor annotation (Placement(transformation(extent={{100,100},{120,120}})));

32: Name 'groundTemp' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: ground, Temp. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a groundTemp[5] "HeatPort to force a ground temperature for the ground level's floor." annotation (Placement(transformation(extent={{-10,-110},{10,-90}})));

33: Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Utilities.Interfaces.Adaptors.ConvRadToCombPort heatStarToCombHeaters[5] annotation (Placement(transformation( extent={{10,-8},{-10,8}}, rotation=90, origin={0,-28})));Utilities.Interfaces.ConvRadComb portConvRadRooms[5] "1: LivingRoom_GF, 2: Hobby_GF, 3: Corridor, 4: WC_Storage_GF, 5: Kitchen_GF" annotation (Placement(transformation(extent={{-10,-10},{10,10}})));

34: Name 'portVent_in' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent. Affected line: Modelica.Fluid.Interfaces.FluidPort_a portVent_in[5](redeclare final package Medium = Medium) "Inlet for ventilation" annotation (Placement( transformation(extent={{94,-78},{114,-58}}), iconTransformation(extent={ {94,-70},{108,-56}})));

35: Name 'portVent_out' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent. Affected line: Modelica.Fluid.Interfaces.FluidPort_b portVent_out[5](redeclare final package Medium = Medium) "Outlet of Ventilation" annotation (Placement( transformation(extent={{94,-94},{114,-74}}), iconTransformation(extent={ {94,-94},{108,-80}})));

36: Missing documentation, Name 'thermOutside' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Outside. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermOutside annotation (Placement(transformation(extent={{-114,90},{-94,110}})));


AixLib/ThermalZones/HighOrder/House/OFD_MiddleInnerLoadWall/BuildingEnvelope/WholeHouseBuildingEnvelope.mo
1: Name 'Medium' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Medium. Affected line: replaceable package Medium = AixLib.Media.Air constrainedby Modelica.Media.Interfaces.PartialMedium "Medium in the component" annotation (choices( choice(redeclare package MediumR = AixLib.Media.Air "Moist air"), choice(redeclare package MediumR = AixLib.Media.Air (extraPropertiesNames={"CO2"}, C_nominal = {6.12E-4}) "Moist air with tracer gas (404 ppm CO2)")));

2: Name 'AirExchangeCorridor' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Exchange, Corridor. Affected line: parameter Real AirExchangeCorridor=2 "Air exchange corridors in 1/h " annotation (Dialog(group="Air Exchange Corridors", descriptionLabel=true));

3: Name 'solar_absorptance_RO' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: solar_absorptance_, O. Affected line: parameter Real solar_absorptance_RO=0.1 "Solar absoptance roof " annotation (Dialog(tab="Outer walls", group="Solar absorptance", descriptionLabel=true));

4: Name 'UValOutDoors' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Doors. Affected line: parameter Modelica.Units.SI.CoefficientOfHeatTransfer UValOutDoors=2.5 "U-value (thermal transmittance) of doors in outer walls" annotation (Dialog(tab="Outer walls", group="Doors"));

5: Name 'epsOutDoors' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Doors. Affected line: parameter Modelica.Units.SI.Emissivity epsOutDoors( min=0, max=1) = 0.95 "Emissivity of inside surface of outer doors" annotation (Dialog(tab="Outer walls", group="Doors"));

6: Name 'TDynVentHobby_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Hobby_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentHobby_set=295.15 "Hobby set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

7: Name 'TDynVentCorridorGF_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Corridor, G, F_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentCorridorGF_set=291.15 "Corridor (GF) set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

8: Name 'TDynVentWCStorage_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, W, Storage_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentWCStorage_set=291.15 "WC / Storage room set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

9: Name 'TDynVentKitchen_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Kitchen_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentKitchen_set=295.15 "Kitchen set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

10: Name 'TDynVentBedroom_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Bedroom_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentBedroom_set=295.15 "Bedroom set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

11: Name 'TDynVentChildren1_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Children1_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentChildren1_set=295.15 "Children 1 room set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

12: Name 'TDynVentCorridorUF_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Corridor, F_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentCorridorUF_set=291.15 "Corridor (UF) set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

13: Name 'TDynVentBath_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Bath_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentBath_set=297.15 "Bathroom set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

14: Name 'TDynVentChildren2_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Children2_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentChildren2_set=295.15 "Children 2 room set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

15: Name 'TDynVentAttic_set' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Attic_set. Affected line: parameter Modelica.Units.SI.Temperature TDynVentAttic_set=288.15 "Attic set temperature for dyn. vent." annotation (Dialog(tab= "Dynamic ventilation", enable=withDynamicVentilation));

16: Name 'useVentAirPort' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent, Port. Affected line: parameter Boolean useVentAirPort = false "Use air port for ventialtion" annotation (Dialog(tab= "Dynamic ventilation"));

17: Missing documentation, Name 'groundFloor_Building' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: ground, Floor_, Building. Affected line: AixLib.ThermalZones.HighOrder.House.OFD_MiddleInnerLoadWall.BuildingEnvelope.GroundFloorBuildingEnvelope groundFloor_Building( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final T0_air=T0_air, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final solar_absorptance_OW=solar_absorptance_OW, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, redeclare package Medium = Medium, final UValOutDoors=UValOutDoors, final epsOutDoors=epsOutDoors, final Tset_Livingroom=TDynVentLivingroom_set, final Tset_Hobby=TDynVentHobby_set, final Tset_Corridor=TDynVentCorridorGF_set, final Tset_WC=TDynVentWCStorage_set, final Tset_Kitchen=TDynVentKitchen_set) annotation (Placement(transformation(extent={{-20,-74},{20,-26}})));

18: Missing documentation, Name 'upperFloor_Building' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: upper, Floor_, Building. Affected line: AixLib.ThermalZones.HighOrder.House.OFD_MiddleInnerLoadWall.BuildingEnvelope.UpperFloorBuildingEnvelope upperFloor_Building( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final T0_air=T0_air, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final solar_absorptance_OW=solar_absorptance_OW, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final withDynamicVentilation=withDynamicVentilation, redeclare package Medium = Medium, final solar_absorptance_RO=solar_absorptance_RO, final Tset_Bedroom=TDynVentBedroom_set, final Tset_Children1=TDynVentChildren1_set, final Tset_Corridor=TDynVentCorridorUF_set, final Tset_Bath=TDynVentBath_set, final Tset_Children2=TDynVentChildren2_set, final UValOutDoors=UValOutDoors, final epsOutDoors=epsOutDoors) annotation (Placement(transformation(extent={{-26,-12}, {20,34}})));

19: Missing documentation, Name 'attic_2Ro_5Rooms' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: attic_, Ro_5, Rooms. Affected line: AixLib.ThermalZones.HighOrder.Rooms.OFD.Attic_Ro2Lf5 attic_2Ro_5Rooms( final denAir=denAir, final cAir=cAir, final wallTypes=wallTypes, final energyDynamicsWalls=energyDynamicsWalls, final energyDynamics=energyDynamics, final T0_air=T0_air, final TWalls_start=TWalls_start, final calcMethodIn=calcMethodIn, final hConIn_const=hConIn_const, final radLongCalcMethod=radLongCalcMethod, final T_ref=T_ref, final Type_Win=Type_Win, redeclare final model WindowModel = WindowModel, redeclare final model CorrSolarGainWin = CorrSolarGainWin, final solar_absorptance_OW=solar_absorptance_OW, final calcMethodOut=calcMethodOut, final surfaceType=surfaceType, final hConOut_const=hConOut_const, final use_infiltEN12831=use_infiltEN12831, final n50=n50, final e=e, final eps=eps, final use_sunblind=use_sunblind, final ratioSunblind=ratioSunblind, final solIrrThreshold=solIrrThreshold, final TOutAirLimit=TOutAirLimit, final withDynamicVentilation=withDynamicVentilation, final HeatingLimit=HeatingLimit, final Max_VR=Max_VR, final Diff_toTempset=Diff_toTempset, final Tset=TDynVentAttic_set, final solar_absorptance_RO=solar_absorptance_RO, length=10.64, width=4.75, roof_width1=3.36, roof_width2=3.36, room1_length=5.875, room2_length=3.215, room3_length=3.92, room4_length=3.215, room5_length=4.62, room1_width=2.28, room2_width=2.28, room3_width=2.28, room4_width=2.28, room5_width=2.28, nPorts=2, alfa=1.5707963267949, replaceable package Medium = Medium) annotation (Placement(transformation(extent={{-22,44},{22,82}})));

20: Missing documentation, Name 'WindSpeedPort' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Wind, Speed, Port. Affected line: Modelica.Blocks.Interfaces.RealInput WindSpeedPort if (calcMethodOut == AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodConvectiveHeatTransfer.DIN_6946 or calcMethodOut == AixLib.ThermalZones.HighOrder.Components.Types.CalcMethodConvectiveHeatTransfer.ASHRAE_Fundamentals) annotation (Placement( transformation(extent={{-128,66},{-100,94}}),iconTransformation(extent={{-120,60},{-100,80}})));

21: Name 'AirExchangePort' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Exchange, Port. Affected line: Modelica.Blocks.Interfaces.RealInput AirExchangePort[11] "1: LivingRoom_GF, 2: Hobby_GF, 3: Corridor_GF, 4: WC_Storage_GF, 5: Kitchen_GF, 6: Bedroom_UF, 7: Child1_UF, 8: Corridor_UF, 9: Bath_UF, 10: Child2_UF, 11: Attic" annotation (Placement(transformation(extent={{-128,42},{-100,70}}), iconTransformation(extent={{-120,40},{-100,60}})));

22: Missing documentation, Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Utilities.Interfaces.SolarRad_in SolarRadiationPort_RoofS annotation ( Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,64}), iconTransformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,64})));Utilities.Interfaces.SolarRad_in SolarRadiationPort_RoofN annotation ( Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,90}), iconTransformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,90})));Utilities.Interfaces.SolarRad_in North annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,38}), iconTransformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,38})));Utilities.Interfaces.SolarRad_in East annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,12}), iconTransformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,12})));Utilities.Interfaces.SolarRad_in South annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,-14}), iconTransformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,-14})));Utilities.Interfaces.SolarRad_in West annotation (Placement(transformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,-38}), iconTransformation( extent={{-10,-10},{10,10}}, rotation=180, origin={106,-38})));

23: Missing documentation, Name 'varAirExchange' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Exchange. Affected line: AixLib.ThermalZones.HighOrder.Components.DryAir.VarAirExchange varAirExchange( final V=0.5*(upperFloor_Building.Corridor.airload.V + groundFloor_Building.Corridor.airload.V), final c=cAir, final rho=denAir) annotation (Placement( transformation( extent={{-5,5},{5,-5}}, rotation=270, origin={39,-21})));

24: Missing documentation, Name 'AirExchangeCorridor_Source' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Exchange, Corridor_, Source. Affected line: Modelica.Blocks.Sources.Constant AirExchangeCorridor_Source(final k=AirExchangeCorridor) annotation (Placement(transformation(extent={{56,-16},{50,-10}})));

25: Name 'heatingToRooms' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: heating, Rooms. Affected line: AixLib.Utilities.Interfaces.ConvRadComb heatingToRooms[11] "1: LivingRoom_GF, 2: Hobby_GF, 3: Corridor_GF, 4: WC_Storage_GF, 5: Kitchen_GF, 6: Bedroom_UF, 7: Child1_UF, 8: Corridor_UF, 9: Bath_UF, 10: Child2_UF, 11: Attic" annotation (Placement(transformation(extent={{-112,-30},{-92,-10}}), iconTransformation(extent={{-110,-38},{-90,-18}})));

26: Name 'groundTemp' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: ground, Temp. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a groundTemp[5] "HeatPorts to force ground temperature(s) for the ground floor." annotation (Placement(transformation(extent={{-10,-110},{10,-90}}), iconTransformation(extent={{-10,-110},{10,-90}})));

27: Missing documentation, Could not extract name from line and check correctness, is your type specification correct (full library path)?. Affected line: Components.Walls.BaseClasses.SimpleNLayer groPlateLowPart[5]( final A={groundFloor_Building.Livingroom.floor.Wall.simpleNLayer.A,groundFloor_Building.Hobby.floor.Wall.simpleNLayer.A,groundFloor_Building.Corridor.floor.Wall.simpleNLayer.A,groundFloor_Building.WC_Storage.floor.Wall.simpleNLayer.A,groundFloor_Building.Kitchen.floor.Wall.simpleNLayer.A}, each final T_start=fill(TWalls_start, wallTypes.groundPlate_low_half.n), each final wallRec=wallTypes.groundPlate_low_half, each final energyDynamics=energyDynamicsWalls) annotation (Placement(transformation( extent={{-4,-18},{4,18}}, rotation=-90, origin={0,-86})));Utilities.Interfaces.Adaptors.ConvRadToCombPort heatStarToCombAttic annotation (Placement(transformation( extent={{6,-5},{-6,5}}, rotation=180, origin={-36,51})));

28: Name 'uppFloDown' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Down. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a uppFloDown[5] "Heat port floor of upper floor" annotation (Placement(transformation(extent={{-110,18},{-90,38}}), iconTransformation(extent={{-110,14},{-90,34}})));

29: Name 'groFloUp' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Up. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a groFloUp[5] "Heat port ceiling of ground floor" annotation (Placement(transformation(extent={{-110,-4},{-90,16}}), iconTransformation(extent={{-110,-10},{-90,10}})));

30: Name 'groFloDown' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Down. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a groFloDown[5] "Heat port floor of ground floor (towards ground plate)" annotation (Placement(transformation(extent={{-112,-78},{-92,-58}}), iconTransformation(extent={{-110,-66},{-90,-46}})));

31: Name 'groPlateUp' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Plate, Up. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a groPlateUp[5] "Heat port ground plate towards ground floor" annotation (Placement(transformation(extent={{-112,-100},{-92,-80}}), iconTransformation(extent={{-110,-90},{-90,-70}})));

32: Name 'portVent_in' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent. Affected line: Modelica.Fluid.Interfaces.FluidPort_a portVent_in[11](redeclare final package Medium = Medium) if useVentAirPort "Inlet for ventilation" annotation ( Placement(transformation(extent={{90,-78},{110,-58}}), iconTransformation( extent={{94,-70},{108,-56}})));

33: Name 'portVent_out' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: Vent. Affected line: Modelica.Fluid.Interfaces.FluidPort_b portVent_out[11](redeclare final package Medium = Medium) if useVentAirPort "Outlet of Ventilation" annotation (Placement( transformation(extent={{90,-98},{110,-78}}), iconTransformation(extent={ {96,-92},{110,-78}})));

34: Missing documentation, Name 'thermOutside' contains parts with more/less than 3 characters or which are not part of special cases. Affected parts: therm, Outside. Affected line: Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a thermOutside annotation (Placement(transformation(extent={{-112,90},{-92,110}})));